500028-WP-US

Stereo Hi-Fi Audio
Wall Plate Balun, US

Allows unbalanced line level stereo analogue audio to be transmitted via Category 5e/6 unshielded copper twisted pair (UTP) in a point to point connection
Designed for audio applications where full-range, hi-fidelity
audio frequency response is required.
Used in pairs, the Stereo Hi-Fi Wall Balun eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or
moved within a structured cabling environment.
20 Hz to 20 KHz bandwidth
Quicker moves, adds and changes
Up to 3,250 ft (1km) via Cat5e/6 UTP

500033-WP-US

Quad Audio Wall Plate Balun, US

Allows up to four (4) analog line audio signals to be transmitted via unshielded twisted pair (UTP) cable in a point-to-point connection
Used in pairs, allows up to four (4) coax audio cables to be replaced by one (1) Cat5e/6 cable.
20 Hz to 20 KHz bandwidth
Analog audio up to 3,250 ft (1.0 km) via Cat5e/6
Compact design for neater wiring

500038-WP-US

Quad Audio Wall Plate Balun, US

Allows a single S-Video signal to be transmitted via unshielded twisted pair (UTP) cable up to 1000 ft (305m) in a point-to-point connection.
Full audio bandwidth response for high fidelity applications
20 Hz to 20 KHz bandwidth
Lifetime warranty

500041-WP-US & 500043-WP-US

VGA Wall Balun II, US

Eliminates costly and bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via one (1) Cat5e/6 cable
Allows VGA video to be transmitted up to 350ft (107m) via
Cat5e/6 at 800 x 600 resolution.
The 500043-WP-US works with the 500041-WP-US or in conjunction with the 500041 or 500042. The 500041-WP-US works with the 500043-WP-US or in conjunction with the 500040 or 500043.
Fully supports Cat5e/6 unshielded twisted pair (UTP)*

*Reset button on units may be required with certain sync-sensitive displays. Not compatible with 500010, 500011 and 500014.

500049-WP-US

Stereo AV/IR Pass-Thru
Wall Balun, US

Allows one (1) composite video,
one (1) stereo audio and one (1) IR emitter signal
to be transmitted via a single Cat5e/6 cable in a
point-to-point connection
Full audio bandwidth response for high fidelity applications
Works in pairs or in conjunction with the 500048 or 500049.
Video up to 2,200 feet (670m) via Cat5e/6
Audio up to 3,250 ft (990m) via Cat5e/6
IR 2-wire emitter pass-thru on fourth twisted pair

500053-WP-US

Component Video/Analog Audio
Wall Balun, US

Allows one component video (YPbPr or RGB) signal
and one Analog Audio signal to be transmitted via one
Category 5e/6 twisted pair cable for more cost-efficient
cabling
Used in pairs or with the 500052/500053, supports 480i/p,
720p and 1080i/p video formats for commercial and
residential hi-definition (HDTV) video applications.
Supports 480i/p, 720p, 1080i/p
Supports 480i/p up to 1,000 ft (305m) via Cat5E/6
Supports 720p/1080i/p up to 500 ft (152m) via Cat5E/6
Supports analog audio on fourth twisted pair
Modular shielded RJ45 connector

500058-WP-US

Component Video/Stereo Audio
Wall Balun, US

Allows one component video (YPbPr or RGB) signal and one (1) Stereo Audio channel to be transmitted via one (1) Cat5e/6 twisted pair cable for more cost-efficient cabling.
Used in pairs or in conjunction wih the 500058, supports highdefinition resolution and true left/right stereo audio for
hi-fidelity commercial and residential AV applications.
Supports 720p/1080i/p up to 500 ft (152m) via
Cat5E/6
Supports true Hi-Fi left/right analog stereo audio
Ground Loop Coupling (GLC) (US Patent pending)
Modular shielded RJ45 connector

* Not compatible with 500050/51/52/53/54/55/56/57/250/251/252/253

500401-WP-US

HDMI Econo Plus Wall Plate
Extender Kit, US

Allows HDMI equipment to be connected up to 150 ft (45m) via two (2) Cat5e unshielded twisted pair cables in a point-to-point
configuration at 1080p resolution
Supports 1080p Deep Color up to 90 ft (27m) via two (2)Cat6 cables
Comes with one (1) transmitter, one (1) receiver and one (1) power
supply (may also be used without external power)
May be used with MuxLab mounting accessories